Roofing Installation

1. Translucent roofs and metal sheets should be installed altogether in order to avoid the gap between

the metal sheets. The translucent roof has to fit with the gap by laying both side of end rip on top of each
side of the metal sheet. In case of re-roofing, it has to make sure that the space between the metal sheets
has to be matched with the new roofing sheet.

Since translucent fiberglass roof is thicker than metal sheet, then the metal sheet cannot properly sit

over the fiberglass roof. Normal metal sheet will have one end rib to sit on another metal sheet that the edge
has been designed to lift up. So when it has to be laid under the fiberglass roof, the supporter will be needed
on this side for better tightens than no supporter.

2. Drills leading hole for inserting the screw to fix the translucent roof. Diameter of the hole should be

bigger than screw’s diameter about 1-3 mm. that it will allow the translucent roof to freely expand or contract.

3. Fixes the translucent roof with self drilling screw by positioning the center of screw to match with the
center of the leading hole. To increase the installation effectiveness, the Space Cyclonics Washer with
30 mm. diameter has been recommended.

Flashing Installation

Flashing Installation

Flashing rapidly installed by fastening Screw Dilling simple short wave, which has no savings in time and take action for workers at the Royal in the installation for those who want to install your own ก้อ pessimism will be made. The images suggest the work

Type of Screw Drilling

• 
  
  10-16x16 Drilling Capacity 4.5 mm. The Work Thickness  1.2-4.5 mm. type of fastener 10-12x19
• 
  
  12-14x20 Drilling Capacity 4.5 mm. The Work Thickness 1.2-4.5 mm. type of fastener 10-12x19  

Siding Installation

Siding Installation

Drills leading hole for inserting the screw to fix the translucent roof. Diameter of the hole should be bigger than screw’s diameter about 1-3 mm. that it will allow the translucent roof to freely expand or contract.

Wall Siding

Type of Screw Drilling

• 
  
  10-16 x 16  Drilling Capacity 6.0 mm. Screw Length 5 mm. 10 metal Wood Screw
• 14-14 x 20 Drilling Capacity 6.0 mm. Screw Length 6 mm. 10 metal Wood Screw

Siding installation, we will use as a fire at the Mellon family. Show more like the top and work easily and conveniently save time on installation.

Roof installation

Roofing Installation

A device for fastening sheet metal roof (Roofing) and take cover material (Flashing) There are many colors and many sizes. To fit each style works. Japan can use wood or steel, flat very well. Leg click the Clip is blocked or devices designed to work seamless to you. And easy to install. Also enjoys a patent pool in the adhesion image, a Dii. 
Translucent roof and sheets of metal shall beinstalled everything in order to avoid a gap between
sheets of metal. The translucent roof has to fit with the gap from both sides of the RIP on the end of each
side of the plate. In case of re-roofing, it was to make sure that the space between the plates should be combined with the new cover sheet.
 

Fastening screw short wave.

Type of screw

• 
  
  12-15x45 Drilling Capacity 6.0 mm. Screw Length Maximum 30 mm. 14 Metal Wood Screw.
• 
  
  12-15x50 Drilling Capacity 6.0 mm. Screw Length Maximum 30 mm. 14 Metal Wood Screw.
• 
  
  12-15x55 Drilling Capacity 6.0 mm. Screw Length Maximum 30 mm. 14 Metal Wood Screw.
• 
  
  12-15x68 Drilling Capacity 6.0 mm. Screw Length Maximum 30 mm. 14 Metal Wood Screw.

Since translucent fiberglass roof is thicker than metal sheet, then the metal sheet cannot properly sit

over the fiberglass roof. Normal metal sheet will haveone end rib to sit on another metal sheet that the edge
has been designed to lift up. So when it has to be laidunder the fiberglass roof, the supporter will be needed
on this side for better tightens than no supporter.